AIPER Cordless Robotic Pool Cleaner Seagull 600

Description

(2022 Upgrade) AIPER Cordless Robotic Pool Cleaner, Pool Vacuum with Dual-Drive Motors, Self-Parking, Lightweight, Perfect for Above/In-Ground Flat Pools up to 35 Feet (Lasts 50 Mins) - Seagull 600
About this item
WIRELESS AND SAFER CLEANING: Say goodbye to wires thanks to the Aiper Pool Vacuum's 100% cord-free design. No worry longer about cord entanglement and the risk of power short-out. It lasts up to 50 mins ideal for round ABOVE-GOUND pools (up to 30' diameter), and IN-GROUND flat bottom pools (ONLY ONE DEPTH, up to 15' X 35') AIPER
SUCTION POWER: Dual motors provide suction action and propel it forward at a speed of 52.5 ft/min. Our Pool Cleaner also features 2 independent scrapers that scrub the bottom of your pool. Besides picking up FINE LEAVES, sand, dirt and other debris, it removes grime and sediment so that you do not have to get in the water for clean.
SELF-PARKING: Adopting self-parking smart technology, Aiper Robotic Cleaner stops near the pool wall when the battery is too low or after completing a working cycle. This allows for easy and convenient retrieval. Simply use the included hook to lift it out of the water without getting yourself wet.
EASY TO USE & CLEAN: Lightweight at just 6.6lbs, making it dead easy to use and operate. Just power the unit on, drop it in and walk away. Aiper will perform its duties automatically and without supervision.When its work finished, simply remove the cover, and rinse the filter with a hose to clean it.
Product Description
AIPER Cordless Automatic Pool Cleaner
Made Cleaning Clever
Let the AIPER Seagull 600 do the dirty work for you! Your AIPER system is designed to handle all of the work and worries, just enjoy more pool time with your family.
Time-Saving
: Gone are the days of spending hours scraping the bottom trying to pick up dead bugs and loose leaves. Get a sparkling clean pool in 50 Minutes.
Cost-Effective
: Aiper Robotic Cleaner uses less than 0.03 kWh per time (on average) for a total yearly electricity cost of only about 1 dollar.
Specifications:
Power: 30 Watts
Charging Input: 110V-240V
Size: 24*15*16 inches
Weight: 6.6 lbs
Max Run Time: 50 Minutes
Max Water Depth: 8.2ft (2.5m)
Pool Water PH Value: 7.0-7.4
Always Ready to Clean
With a power adapter, allowing you to recharge your cleaner via any 110v outlet, which takes only 3-4 hours for a full charge. The Seagull 600 can run for up to
50 minutes
before a recharge.
Red Indicator: in charging
Green Indicator: charging completed.
Note: Please shut off your robot before charging, otherwise, it can't be charged successfully.
Easy to Clean Fine Filter Tray
Large enough to store kinds of garbage like leaf fragments, drowned bugs, tough dirt, debris or sands.
Super easy to clean the filter, simply pop out and clean the tray with a garden hose. Save time, get your weekends back!
Note: Don’t forget to clean the filter tray immediately after each use to extend its life span.
Advanced Filtration System
Two suction doors facilitate the suction of fine dust particles and rough debris directly into the filter tray.
The filter tray filters down to just
180μm
for an exceptionally clean pool.
Note: Seagull 600 can't clean floating algae or very large leaves(width exceeding
4 inches
).
For Optimal Use:
Ideal for use on a flat floor pool, especially above-ground swimming pools. Not suitable for very large in-ground pools (with slope or area exceeding 525 sq.ft / 50 sq.m).
The Seagull 600 will not climb walls or stairs.
Not able to clean floating algae or very large leaves (width exceeding 4 inches).
Notes:
Must be fully charged before first use. Must turn off the machine before charging.
The optimal water temperature for our machine to work is 41F to 95F, if worked under 35F, the battery duration and performance may be affected.
After power the unit on, please put it into the water at once, otherwise it will beep.
After each use, wipe the charging pin dry with a paper towel or cotton swab. Leave the unit to sit for a few minutes to let the moisture dry out before charging.
Always remember to turn off the power switch when the cleaner is not in the water to protect the battery and the motor.
The cleaner should be stored in a cool place when charging. Do not cover the unit or a risk of damage to the internal electrical components could occur.
All AIPER Pool Cleaners must be tested throughly under water before packaging to ensure its quality, so it is normal if you find water left in the machine.