Aquabot Pool Rover S2- Pura & others pool robot filter bags reusable disposable

Description

Homemade replacement filter bags for Aquabot Series of Pool Robots that use 2 filter bags at a time
These work for the Aquabot S2 series and Aqua Pura and a few others. Basically if you see your robot filter area and it looks like what I have in my pictures and it matches yours then it will work for you!
These are sold in even numbered quantities since you need at least 2.
A set of 2 is making each filter only - much much cheaper then the bags sold by the manufacturer.. And these bags are QUALITY... They will last and can be reused over and over
Gradually discounted for larger set purchases and the shipping is a flat for any amount (USA only)
Buy a few sets and you will always have fresh filters on hand.. Works great if pool is dirty , you dont waste time cleaning out the bags, you simply put a fresh set on and while your robot is working for you, then you can clean out the dirty pair.
**The pictures you see are from my own robot and my own pool - just look at all the fine dirt that these bags caught in its mesh in additional to leave and other nasty stuff** That's why I use them and then toss them away!
if you are like me that likes to toss the dirty bag out and replace with new and not bother cleaning them out then in its your best interest to buy enough for a season
I also give you 2 rubber bands to help keep these on the suction ports - read below
Shipping is a
flat for any amount
of bags (USA only) so if you want to buy a whole bunch for the season you save some money here
You can rinse and reuse them over and over
or do the easy thing and toss them when they are full
or clean them a few times then toss them
whatever works for you
if you buy 2 sets you will have one clean set ready to go while you clean out the dirty bags and let them dry (I do this when pool is very dirty) if you like to re use them
I use these bags instead of the bags that came with my robot. I hate rinsing them with a hose and trying to get them to come clean, instead after a week (depending on how much dirt and debris I had in the pool) I just toss them out and place in 2 more, its that simple.
And the whole thing with the Velcro?? Please!! what where they thinking???
My bags are so much easier and probably work better
See my pics for all the dirt and debris that they capture
You have to use a rubber band to help keep the bag on the suction ports, its simple
place the rubber band over the elastic opening of the bag, place opening of bag over suction port and then pull up rubber band to form the seal over the bag onto the suction port
Its quite easy and ensures the bag with not come off -see the pictures
You can also use a thin piece of wire too as some of my pics show a thin red wire during my testing phase with my robot
Track Page Views With
Auctiva's FREE Counter