Best! Economy Manual Acrylic Letter Making Tool Bender, Bending Tools A+U Type

Description

US Stock-Economy Manual Acrylic Letter Making Tool Bender, A+U Type
One Year Warranty
Fast / Free shipment
Ship out within 24h on workday
Voltage:
100-240V
Power:
Angle bending 39W, Arc bending 60W
Heating Temperature:
200°C±5%
Arc Heater size:
100mm x 50mm x 2mm (3.9" x 2" x 0.08")
Angle Heater Size:
100mm x 2.5mm x 2mm (3.9" x 0.1" x 0.08")
Bending Letter Hight:
0 - 100mm (3.9")
Bending Thickness:
1.5mm - 4mm
Arc bending soft time (2.5mm thickness, 20℃):
About 9 seconds
Angle bending soft time (2.5mm thickness, 20℃):
About 5 seconds
• The fourth generation product, PTC heating elements have features of safe and energy-saving, fast heat up, durable, automatic temperature control, longer life;
• Automatic constant temperature, without tedious temperature Settings, it is more convenient to use;
• Titanium alloy thermal conduct
ivity plate, side bar heated evenly, automatically adjust the heating plate and the edge of the joint Angle, rapid heat
transfer of edge to soften;
• The heating plate surface oxidized by special processing, do not produce flue gas when heated, non-stick plate;
• The practical design, the shell is made of high quality heat-resistant engineering plastics, has adjusted balance;
•
Warranty: 1 year.
• PTC heating elements have features of safe and energy-saving, fast heat up, durable, automatic temperature control;
• Constant temperature technology, longer life;
• Easy operation, time-saving;
• The heating plate using oxidation treatment, heating don't smoke;
It is suitable for heating acrylic within 1.5mm – 4mm (0.06" x 0.16") thickness.
360 Degree Rotate End:
Many tools are used frequently, its power cable is easy to get kink and break up. But our CS-HD-BC09 acrylic bending machine tool can avoid this situation because of the 360 degree rotate design of the power cable and heating plate joint.
Remarks:
• You’d better use the bender with proper strength; otherwise it will cause heat loss and heat uneven.
• If the arc length is greater than heating plate breadth, you can use the arc bender to heat 1-3 times continuously and arrange in a row. The arc length be bent is within 150mm.
• With short preheat time; restart the bender won't waste too much time. If you do not use it more than 5 minutes, please shut off the power switch to save electricity.
• Please do not put the heating plate onto the power cable.
• Kindly remind you that heating transparent acrylic could leave tiny marks on the material, which is not clear on the acrylic of other colors. Please notice it when you place an order.
Connect the power cable, after about 60 seconds heating time, you can use the bender.
Using the angle or arc bender vertically clamp the acrylic plate, soften the acrylic plate several seconds, and then remove the bender, make angle and arc you want, fix it with glue.
Processing Material:
Acrylic, Plastic, PVC, Plexiglass
This type acrylic bender is ideal for LED Acrylic Lighting Channel Letters, acrylic sign letters making. The acrylic bending machine is a equipment which can softens and bends materials such as acrylic, organic plate, PVC, etc and other various thermoplastic materials into shapes by heating. It is widely applied.
Lead Time: After receiving customer's deposit, within 24 hours.
Carton Box: There is total one carton box.
Packing List:
Product Weight
1.3Ib (0.6kg) / sets
Package
Carton box
Packing Size
(12.6" x 6.5" x 2.4") 320mm x 165mm x 60mm
Gross Weight
1.5Ib (0.7kg) / sets