Boston Gear - L149YP L149Y-P Bevel Pinion Gear 21 Ratio 0.375" Bore 16 Pitch ...

Description

FREE SHIPPING IN THE USA!!!
Boston Gear - L149YP L149Y-P Bevel Pinion Gear, 2:1 Ratio, 0.375" Bore, 16 Pitch, 16 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel
16 teeth for use with L149Y-G mating bevel gear in 2:1 gear ratio applications
Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion
This Boston Gear L149Y-P bevel pinion gear has a 16 diametral pitch, 16 steel teeth, and a straight bevel to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This bevel gear is intended for use with an L149Y-G bevel gear for applications requiring a 2:1 gear ratio. It has a 0.375" bore diameter, is made of low carbon steel (0.2 percent carbon), and has unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion. The 20 degree pressure angle provides a lower contact ratio between gears than a smaller pressure angle, resulting in higher load capacity. This gear is used only with its mating gear because bevel gears can mesh only with gears that have the same pressure angle, spiral angle, and diametral pitch (that is, the number of teeth per inch). This Boston Gear bevel gear is suitable for use in a variety of commercial and industrial applications, such as construction equipment, aeronautics, conveyors, and manufacturing equipment, among others. Bevel gears have a blunt-end cone shape with teeth along the cone face and are used for transmitting torque and motion between perpendicular rotating shafts. A bevel gear's pressure angle, spiral angle, diametral pitch (also called DP or pitch), and its material are important factors to consider. A bevel gear is part of a set of two gears, and the gear ratio for the set is determined by the number of teeth on each gear. Gears come in several types for use in different power transmission configurations and for different applications, including spur gears (for rotating shafts parallel to each other), change gears (to increase or decrease torque and speed), helical gears (for high rates of rotational speed), internal gears (where one gear is nested inside the other), rack and pinion gears (for turning rotational motion into linear motion), and worm gears (for perpendicular shafts in tight spaces and quiet operation). Gears are suitable for use in the agriculture, automotive, construction, mining, and packaging industries, and can be found in a variety of machines, including bicycles, automobiles, and elevators, among others. Boston Gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. The company, founded in 1877, is headquartered in Charlotte, NC, and meets International Organization for Standardization (ISO) standard 9001:2008 standard.
Limited Quantity!!! Don’t miss out, buy yours TODAY!!!
Shipping
We offer FREE shipping on all orders in the US !!!
We ship within 3-4 business days of payment, usually sooner.
We use a selection of shipping services such as UPS, FedEx, USPS etc.
We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed.
Local pickups and combined shipping options are not provided at this time.
Return
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Feedback
Customer satisfaction is very important to us.
If you have any problem with your order or question regarding your transaction, please contact us  before leaving any type of feedback and we will do our best to make you satisfied.
We will work with you to resolve any problem you may have.
Contact Us
If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays.
Please visit our eBay store to check out other items for sale!
Boston Gear - L149YP L149Y-P Bevel Pinion Gear, 2:1 Ratio, 0.375" Bore, 16 Pitch, 16 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel