US Stock-Economy Manual Acrylic Letter Making Tool Bender, A+U Type Bending Tool

Description

Description
US Stock 2pcs/set Manual 3D Acrylic Channel Letter Plastic Bending Tool PVC Heater Bender
More Freight Saved
More competitive Price
Ship out within 24 hours on work day
Stock in CA USA
• PTC heating elements have features of safe and energy-saving, fast heat up, durable, automatic temperature control;
• Constant temperature technology, longer life;
• Easy operation, time-saving;
• The heating plate using oxidation treatment, heating don't smoke;
It is suitable for heating acrylic within 1.5mm – 4mm (0.06" x 0.16") thickness.
• The fourth generation product, PTC heating elements have features of safe and energy-saving, fast heat up, durable, automatic temperature control, longer life;
• Automatic constant temperature, without tedious temperature Settings, it is more convenient to use;
• Titanium alloy thermal conductivity plate, side bar heated evenly, automatically adjust the heating plate and the edge of the joint Angle, rapid heat transfer of edge to soften;
• The heating plate surface oxidized by special processing, do not produce flue gas when heated, non-stick plate;
• The practical design, the shell is made of high quality heat-resistant engineering plastics, has adjusted balance;
Processing Material
Acrylic, plastic, plexiglass
Voltage
100-240V
Power
Angle bending 39W,
Arc bending 60W
Heating Temperature
200°C±5%
Arc Heater size
100mm x 50mm x 2mm (3.9" x 2" x 0.08")
Angle Heater Size
100mm x 2.5mm x 2mm (3.9" x 0.1" x 0.08")
Bending Letter Hight
0 - 100mm (3.9")
Bending Thickness
1.5mm - 4mm (0.06" - 0.16")
Arc bending soft time (2.5mm thickness, 20
°C
)
About 9 seconds
Angle bending soft time (2.5mm thickness, 20
°C
)
About 5 seconds
360 Degree Rotate End:
Many tools are used frequently, its power cable is easy to get kink and break up. But our
acrylic bending machine
tool can avoid this situation because of the 360 degree rotate design of the power cable and heating plate joint.
Remarks:
• You’d better use the bender with proper strength; otherwise it will cause heat loss and heat uneven.
• If the arc length is greater than heating plate breadth, you can use the arc bender to heat 1-3 times continuously and arrange in a row. The arc length be bent is within
150mm
.
• With short preheat time; restart the bender won't waste too much time. If you do not use it more than 5 minutes, please shut off the power switch to save electricity.
• Please do not put the heating plate onto the power cable.
• Kindly remind you that heating transparent acrylic could leave tiny marks on the material, which is not clear on the acrylic of other colors. Please notice it when you place an order.
Ship out within 24 hours(Working time: Monday to Friday)
Connect the power cable, after about 60 seconds heating time, you can use the bender.
Using the angle or arc bender vertically clamp the acrylic plate, soften the acrylic plate several seconds, and then remove the bender, make angle and arc you want, fix it with glue.
Sharp Corner Bending Machine Tool (Acrylic Angle Bending Machine Tool)
Round Corner Bending Machine Tool (Acrylic Arc Bending Machine Tool)
Packing List
Product Weight
1.3Ib (0.6kg) / sets
Package
Carton box
Packing Size
(12.6" x 6.5" x 2.4") 320mm x 165mm x 60mm
Gross Weight
1.5Ib (0.7kg) / sets