-40%
Wooden bar press For Hull wood strip press bender 0-4mm Thickness
Wooden bar press For Hull wood strip press bender 0-4mm Thickness
Wooden bar press For Hull wood strip press bender 0-4mm Thickness
Wooden bar press For Hull wood strip press bender 0-4mm Thickness
Wooden bar press For Hull wood strip press bender 0-4mm Thickness
Wooden bar press For Hull wood strip press bender 0-4mm Thickness
Wooden bar press For Hull wood strip press bender 0-4mm Thickness
Wooden bar press For Hull wood strip press bender 0-4mm Thickness
Wooden bar press For Hull wood strip press bender 0-4mm Thickness
Wooden bar press For Hull wood strip press bender 0-4mm Thickness
Wooden bar press For Hull wood strip press bender 0-4mm Thickness

Wooden bar press For Hull wood strip press bender 0-4mm Thickness

$ 23.23

Availability: 100 in stock
  • Purpose:: Hull wood strip press bender
  • Brand: Unbranded
  • MPN: Does Not Apply
  • Thickness range of processed wooden strips:: 0-4mm
  • Restocking Fee: No
  • Weight:: 0.3lb
  • Condition: New
  • Width range of processed wooden strips:: 0-10mm
  • Material:: Aluminum + Stainless Steel
  • All returns accepted: Returns Accepted
  • UPC: DOES NOT APPLY
  • Item must be returned within: 30 Days
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Seller

    Description

    Specifications: Material: Aluminum + Stainless Steel Purpose: Hull wood strip press bender Width range of processed wooden strips: 0-10mm Thickness range of processed wooden strips: 0-4mm Weight: 0.3lb Steps for usage: 1. Unscrew the lock nut and adjust the clearance screw upward. 2. Insert the hull wood strip between the pressing block and the pressing teeth. 3. Adjust the clearance screw downward to clamp the wooden strip. 4.Push the wooden bar of the ship block to squeeze through the gap between the pressure block and the pressure bending teeth. 5. Grasp the exposed wooden bar and pull it out to complete the bending process. 6. If the degree of curvature is insufficient, repeat the above procedure. Note: Wooden strips with a thickness of more than 0.5mm need to be soa
    Specifications:
    Material: Aluminum + Stainless Steel
    Purpose: Hull wood strip press bender
    Width range of processed wooden strips: 0-10mm
    Thickness range of processed wooden strips: 0-4mm
    Weight: 0.3lb
    Steps for usage:
    1. Unscrew the lock nut and adjust the clearance screw upward.
    2. Insert the hull wood strip between the pressing block and the pressing teeth.
    3. Adjust the clearance screw downward to clamp the wooden strip.
    4.Push the wooden bar of the ship block to squeeze through the gap between the pressure block and the pressure bending teeth.
    5. Grasp the exposed wooden bar and pull it out to complete the bending process.
    6. If the degree of curvature is insufficient, repeat the above procedure.
    Note:
    Wooden strips with a thickness of more than 0.5mm need to be soaked in water for more than 10 minutes before processing.
    Packing including
    ：
    1*Wooden bar press
    On Jul-12-21 at 19:28:13 PDT, seller added the following information: